Friday, January 12, 2007

End of year

Wow, it has been along time since I've posted anything. Business has been very busy. Let me give a quick update on how our Murphy bed line is going. We have finished out the 2006 with 52 murphy beds being sold and built, which was our exact goal (1 per week). That is not bad for a small 2 man shop considering all the other items we still offer and build. Next years goal will be 60 murphy beds or 5 per week. That may be too conservative considering the new purchases I've made which has increased production.

My new baby is an edgebander that I've recently bought from Laguna Tools. I took a trip to Atlanta to visit the IWF2006 show for this specific purpose. This has been the largest purchase we've had to make so far in our 27 years in business, even bigger than our wide belt sander. But it has proved itself to be worth it. It is a BIG time saver. What would normally take 2 hours, now takes just 15 minutes. In our business time is money.

With that time savings I was able to keep the prices low. If you remember from an earlier post, my strategy was to artificially keep the prices low to increase interest and to get more web traffic. This has worked, but instead of raising the prices up to where the should have been (pre banding machine era) I can keep it level and save the customers a little.

I did make a small change in pricing. I raised the base price of all the sizes to cover packaging. This was not really a price increase. I just moved it form one place to another. I was figuring it into the shipping cost before. Now I've lower the shipping price to $299. So it is really a wash.

Don't forget to visit our web site at www.wwbeds.com, and our kids website www.poggyskids.com. I do have a new site where I'll focus on just the Murphy beds. That will be www.murphyswall.com.

I've had some interest in our beds from a sales rep., so we've sent a couple up to the furniture market in tupelo Mississippi. I'll post how that goes at a later time. So keep
Wow, it has been along time since I've posted anything. Business has been very busy. Let me give a quick update on how our Murphy bed line is going. We have finished out the 2006 with 52 murphy beds being sold and built, which was our exact goal (1 per week). That is not bad for a small 2 man shop considering all the other items we still offer and build. Next years goal will be 60 murphy beds or 5 per week. That may be too conservative considering the new purchases I've made which has increased production.

My new baby is an edgebander that I've recently bought from Laguna Tools. I took a trip to Atlanta to visit the IWF2006 show for this specific purpose. This has been the largest purchase we've had to make so far in our 27 years in business, even bigger than our wide belt sander. But it has proved itself to be worth it. It is a BIG time saver. What would normally take 2 hours, now takes just 15 minutes. In our business time is money.

With that time savings I was able to keep the prices low. If you remember from an earlier post, my strategy was to artificially keep the prices low to increase interest and to get more web traffic. This has worked, but instead of raising the prices up to where the should have been (pre banding machine era) I can keep it level and save the customers a little.

I did make a small change in pricing. I raised the base price of all the sizes to cover packaging. This was not really a price increase. I just moved it form one place to another. I was figuring it into the shipping cost before. Now I've lower the shipping price to $299. So it is really a wash.

Don't forget to visit our web site at www.wwbeds.com, and our kids website www.poggyskids.com. I do have a new site where I'll focus on just the Murphy beds. That will be www.murphyswall.com.

I've had some interest in our beds from a sales rep., so we've sent a couple up to the furniture market in tupelo Mississippi. I'll post how that goes at a later time. So keep

Saturday, September 23, 2006

Batter Up!


Here at Poggy's Kids furniture we have been known for our baseball bed. This has been a popular item in both our local store and over the internet. Switching to our more "grown up" furniture, we've dove right in on the Murphy bed market and have made a big difference in our product line. I've been averaging about 1 bed per week and we are now preparing for a big increase.

I've been wanting to design and build a Murphy bed with a child's theme. This week I did it. It is not something I've just threw together, I have thought about this idea a while. I've combined both our baseball bed and our Murphy bed into a very exciting new addition to our line. It is our new Locker Room Murphy Bed. It is designed to look like a pair of lockers in the locker room of the child's favorite team. This is complete with the child's name, another name of their choice, and a scoreboard headboard. The display that I made has the optional light kit ($125). This includes 2 can lights, a touch dimmer, and a mercury switch. The cost of this bed is:
Twin size Murphy bed $1082
Locker Graphics $80
Baseball headboad $170
Total $1332

I plan on selling the first 10 or so at $994. I have some other ideas too so keep checking our current project link.

Wednesday, May 31, 2006

New Addition


I've been thinking of adding a new addition to our already diverse product line. This product, I think, will revolutionize the children's bedroom market. It is the Hiddenbed. This simple bed caught my eye surfing the web and I haven't quit thinking about it yet!

Here's the concept. It is a desk then it's a bed. It kind of like our murphy bed (see www.wwbeds.com/murphy.htm ), where the bed folds down from the cabinet. But it even better than that. The bed is made so that things on the desk, like a computer, papers, and a drink, can stay during the transition from desk to bed. No need to move anything. You could download files while sleeping.

It is all in the mechanism. This patented product from www.hiddenbed.com allows the desk to stay perpendicular to the floor. It also slows the motion down, so that it will not be dangerous for the little ones. The entire transformation takes less than 5 seconds.

I plan on building my first on in the next few weeks. I am currently working on getting the hardware shipped from Uruguay, South America. The hardware is reasonably priced, but what is killing me is the shipping and wire transfer fees. It will cost $50 to transfer the funds and $95 for shipping. With those cost I can see why most companies are charging around $2000 for one. As you read in my last post, I am trying to break into the market by artificially keeping my prices low. I am hoping to stay below that $2000 mark.

The company is real restrictive on beds that they will allow us to build. All new designs have to be pre-approved by them before we market them. I can understand that. Their name is on the product and they don't want to ruin it with some bad, fly-by-night company.

Let me know what you think about this. I hope my customers get as excited about this as I am. Keep looking for building pictures on this and other new projects. Comments are always welcome.

Friday, May 05, 2006

Where have I been?

It has been along time since I've posted anything new. Alot of things have happened since then. On a pervious post, I noted that we were gearing up to build Murphy Beds. Well that has exploded. Since then I've build 25-30 complete beds. See http://wwbeds.com/murphy.htm for a few of them.

To give you a little backgroung, In Atlanta Augest 2004, I researched the different types mechenism on the market. This was at the IWF woodworking show. I found that the creat-a-bed mechnism to be the best. With this system the bed is mounted to the wall at 3-4 studs. No need to mount to the floor and ruin your flooring. I also cope around the customers base molding. These two features right here sold me on the mechnicsm. It doesn't become a perminate fixture, you can move it very easy. Features that make it even better are the pneumatic piston lift, and there is no special mattress to buy. With this system there is never any springs to adjust and the pistons are tested at 10,000 revelutions. (see other features) That is 27 years of everyday use! It uses any type of innerspring mattress up to 12" thick. The only set back that I had with the mattress is if a customer wanted to use an ultra lite foam mattress, the foot of the bed wanted to float of the ground. This was easily fixed by adding a little weight at the foot.

My stratigy to sell these beds were to artificially keep the prices down for about 6 months while trying to get my foot into the market. During this time I'll try to get my name out there and to get the web site moving up in the search engines. The name part of that has worked but the search engines has let me down a little. People do stunble across the web site, but not in the numbers expected. I plan to keep the prices where they are for another month or so.

I plan on designing a Murphe bed for dogs. In the mean time keep watching my Current Projects link to see what I'm building.

Tuesday, November 22, 2005

What, is Christmas almost here?

About 1 month till Christmas? Where did the year go? This is our busy time of the year. Like other retail outlets, we rely on this season to continue in business. Unfortunately the "shopping season" is too short. Before I am lynched let me explain. I normally work on a four to six week lead time. This is because everything has to be planned, ordered, built, and finished and each takes a set amount of time. That would leave our cut-off date to be, uh, NOW!

Most people don't want to wait 'till after Christmas for their gift. So I usually give a little break and go a few days longer with the cut-off date. That dead line comes and someone else wants their furniture. Who am I to deny them their Christmas surprise? So I allow a few more orders in. Now we’re really stacked up. Luckily I planned a little ahead a built up stock in some of our popular beds, like the baseball bed. I got them to the point were they are ready for finish (this way the customer can chose the color).

To add the stack of orders. the Democrat/Gazette is doing an article on our Murphy bed. (see www.wwbeds.com/Murphy.htm) They chose us because we are the only one around that builds or carries the Murphy Bed. We also have one on display for them to shoot pictures. Or we "had" one. Just days after the interview, we sold our display to a displaced “Katrina Victim". I would have loved to keep that one, but they needed a bed and needed it quickly. That left me with two weeks to try to squeeze in a new one for display (only one week left now).

I decided to build two different versions of the Murphy bed. The first one will be very simple, no moulding. It will be the least expensive version I can offer. This one will be built from oak, not the cheapest wood, and stained a light oak finish. I should have this in a couple of days. See our current projects for pictures www.wwbeds.com/Current%20Projects.htm . The next one will be a little more elaborate with crown/base moulding, framed out front section, bookcases, lights, and finished in a flat black lacquer on oak. Many people would kill me for covering up the beauty of oak wood with a colored finish, but this will be awesome. The black will cover the wood, but not the grain. It will still have the texture of the grain showing thru - the grain is the best part on oak wood anyway. This one may take another week or so. I probably will not have it finished before the article is released, but at least I will have something for customers to look at.

Christmas is only four weeks away, but I am not worried. God always takes care of us. I have faith the same will happen this year. I pray that my job will not interfere with the true meaning of this season. That is, our Savior was born. Without Jesus being born, He couldn't have died and paid the debt for our sins. We would be eternally separated from God. He was born, He did die, and we are saved.

Thursday, November 03, 2005

Pick Two Any Two

I come across customers all the time who would like everything now. “Give me a quality piece of furniture at a very low price, and by the way I need that ASAP.” In almost all businesses that is impossible to do and stay in business. Most mission statements for companies usually states something about giving or providing their customers with a product or service with a certain level of expected quality, price, or promptness, but there is also their responsibility to the stakeholder of the business (i.e. the owners and employees) By providing all three of these features to a customer, the business would quickly fail.

Let’s look at the first one, quality. Webster defines quality as a “degree of excellence” or a grade. People normally use it to describe high quality furniture. But quality is more like a sliding scale. There are different degrees of quality. For example I could put a quality finish on furniture with just a few steps (stain/seal, sealer coat, top coat). If done correctly, that would be a very fine finish. I could add a few steps to that fine finish and get a very high quality finish.

Another factor to add to the mix would be the price of the piece. Most everyone wants a reasonable price, and most businesses would like to receive a fair price for their items. Price and quality, for the most part, have a direct correlation to each other. When quality goes up price usually does too. Quality can come from a couple a couple of sources. First, quality is gained thru experience. The more experience your employees gain the higher quality you’d expect, and the higher wages they’d expect.

Another would be the time spent on the project. That leads me to my last factor, time. The finish can gain higher quality by spending more time and adding more steps. The longer you spend on a project the more that project would cost in labor. Going the opposite direction, by allowing for more time, cost could go down. This way the project would not require overtime, during a busy time, or it could be scheduled in pockets of free time in your schedule.

As you can see all three affect each other, which means you can’t have your custom product quickly and keep the price and quality down. One must be eliminated, low price, high quality, or speedy delivery. You must pick two and only two.

This usually applies to custom build products only. Production items are sometimes excluded. One example is our baseball bed. It is priced low, high quality, and can be shipped fairly quickly. This is because we already took care of the time factor. We did this by scheduling it ahead of time. We built them in pockets of free or slow time and build a large number together to cut down on the average time.

I can give you that high quality furniture quickly but expect to pay for it. By waiting, it could save you some money. I don’t mind adjusting the time and price factor. I like to leave the quality alone. If the quality move, I like it to move up.

Remember pick two: Price, Quality, Fast.