Custom Twin/Full Bunk

I don't build a lot of bunk beds This is because there are imports in similar styles out on the market. For this one I had a special request. This customer like the style but did not want screws and hardware showing on the end panels that attached the side rails. There was also a need for some drawers.

The drawers have a raised panel look and the ladder had to stop at the lower side rail to keep from interfering with the operation of the drawers.

This one was finished in October 2012 and we used maple wood, dyed and stained to match a cappuccino color.

More info on this and other projects can be found at WWBeds Custom Furniture.

Vintage Locker Murphy Bed Loft

What could this be? Is it a set of lockers? A bunk loft? A Murphy wall bed? It is all the above!

This is a loft style bed with a murphy bed added to the lower section. It is based off a bed I built in the past, my baseball loft murphy bed. It is similar in the design, the theme just changed.

The inspiration for this one came from Pottery Barns Vintage lockers. We were after a beach/weathered look. To achieve this on the finish, I used a glazing technique to give the paint that old antique look. I started with a white undercoater and glazed it with a brown stain.

 Other features added were the handles on the end ladders and the guardrail. The guardrail is a rope design backed with netting. The murphy bed is a full size horizontal. When folded up it take us the room of a twin bunk and allows a little more play room under the bed.  More info on beds like this can be found out our web site WWBeds Custom Furniture or it's sister site Poggy's Kids

Loft With Slide

This is a loft with a simple loft in look, but a little more complex than it seemed. It is built from solid maple with a Red Mahogany stain from Minwax. It is a full size on top and an open play area on bottom. The vertical post have cutouts at the top for handles and they flair at the bottom to give it sort of a Asian feel. The cross supports act as the ladder and a slide was added for those quick exits in the morning.

For support the slats were built in a “T” configuration. Basically I added a board turned 90 degrees to get that end grain strength, since it was spanning a full size width. Also to make is stable and not to sway, I added a bottom 16”h board and used “T” nuts and bolt at the top/back guard rail.

Here is some of the raw building videos:
Loft post
Loft 2
Routering loft post
Loft side build
Loft New sides
wwbeds shop 12/11/09 11:58AM
Slide Sides
wwbeds shop 12/11/09 03:45PM
Loft Slide


More Building pictures can be found in our December 2009 pictures archives or see what we are building not on our Current Projects page

Baseball Loft

This was a project that we finished and delivered on Christmas eve. It is a baseball loft. It is based off my baseball bed that I normally build with the customizable headboard. This is real similar to the baseball loft I built last August. Here are some of the changes I made to this one.
I use the style slide that I have for my Castle Loft. The customer wanted a full size coming straight out on the bottom and the larger slide helped filling in that gap. I like how small the other slide was, but like the sturdiness of this one.

I incorporated the ladder into the side panels. I love this change. The less pieces the easer it will be to ship and assemble. I also looks better and reduces the weight of the panels.
I also didn’t do the dugout bench or wall this time. The customer wanted a full size bed under there instead.

The front guard rail was made form real Louisville Slugger bats. I slightly trimmed both ends of a pair and cut most of the handle off the other two to make is the correct size that I needed. I put them together with a lag dowel type screw. After getting it together It felt a little week at the joint so I made the center support by drilling two 1” holes in a piece of ash, taking the bats apart and sliding it in the middle.

I really like this bed and may try to build one for my showroom and internet. I wasn’t able to get real good pictures, so I’ll have to build another one.

This is a picture of the old style:


Here are some building pictures:




For more building pictures see my Current Projects link at wwbeds.com or poggyskids.com. See what we are doing live: Check out the video live from our shop. http://wwbeds.com/

Combination Loft

This is a loft that I completed on 1/24/2008. It is made from all pine and includes a desk, bookcase, chest and trundle. It also has a pass through on the back side that can be used for storage or a “club house”.

One of the large end panels I did something different. I didn’t want to use solid pine because it needed strength and I didn’t think the solid would hold up and that would have been a lot of gluing. If I used a plywood, I’d have to edge band or add trim along the edge. The edge band would be too square and the molding would have alter the design the customer saw on my original. What I did was to use a MDF core pine panel. I cut the end panels, like normal, rounded it over with a router and after it was stained and finished , the edge looked great. I got the idea from a door I saw on some cabinets a while back.