Display Euro Murphy bed

At the end of the year I started selling off some of my display Murphy beds. Because of this I was left with a bare showroom. I wanted to put something on the floor that I haven’t had there before. I decided on the Euro Murphy bed. This is a bed that I’ve built about five times before. This will be the third in this color combination.

I used maple wood with cherry accents. I edged all boards, whether they were plywood or lumber, with cherry. Then put two strips of cherry down the face. Once it is lacquered, it reviled very nice contrast.

The bookcases are 24” wide and don’t have the usual drink trays. Instead of the drink tray I put a regular drawer on the left side and a pull out desk on the right. The desk pulls out on full extension rails and then the laptop drawer pulls out from that. This allows plenty of leg room for working. A printer can be placed in the cabinet below. Right now I just have adjustable shelves down there. I may change that to a pull out printer tray.

The doors glass has a film on it to give it that Venetian blind effect. I get this film from Outwater The next one that I do I may try some etched style glass.

I currently have two more of this style on order and will be working on them in the next week. I also have another customer that is ready to order one too. I don’t push a particular style but it is weird how my different style come in spurts like this.

Here are some of the others that I’ve done in the past. As I was writing this, I was thinking I have built about 4 or 5 of these, but after posting the pictures I realize there was much more that slipped my mind.












For more building pictures and to see the two that I’ll build in the next couple weeks see my Current Projects link at wwbeds.com or poggyskids.com. See what we are doing live:

Cherry Finish Excalibur

This is a Murphy bed that was completed on 5-9-2008. I call it the Excalibur. This bed has arched raised panels on the face along with fluting on the trim beside the doors. Above the fluting is the release leg that unlocks if from the cabinet and acts at the support feet when the bed is in the down position. Above the feet are rosettes that were cut in.

To tie it in to the customers existing furniture I matched the color and changed the crown up a little. The customer had some dental molding that they wanted to match. To get this to work I had to deviate from my standard cut list and make a taller header and sides. The dental molding wraps around and I needed to figure a break that would allow it to disassemble and reassemble to where the molding looked seamless.

The color is a dye stain followed by a wiping stain. The dye is a combination of brown and red dyes with a lot of thinner and the stain coat is Red Mahoney from Minwax. The cherry colors was matched off a customers drawer.

Here are some links to the building pictures

http://wwbeds.com/may08pictures/IM003587.JPG

http://wwbeds.com/april08pictures/IM003569.JPG

You can see more at our "Current Projects" page.