My Girls Beds

This is a couple Murphy beds that were completed 12-23-2008. I built them for my two daughters. I designed it to cover an entire wall. The two beds are separated by a desk with shelves. Each of the beds and the desk all have a three stage touch sensor lights for reading or to be used as a night light. The lights over the bed I added a mercury switch to shut the lights off when the bed is in the up position.


I finished it in just a natural maple with two coats of pre-cat lacquer to match a chest and a converted changing table that I built before.

I gave this to them on Christmas but were not able to install them until New Years day. We also painted the room Tinkerbell Green.

Here are some more pictures: (Put you mouse on the picture for a discription)

Cherry Finish Excalibur

This is a Murphy bed that was completed on 5-9-2008. I call it the Excalibur. This bed has arched raised panels on the face along with fluting on the trim beside the doors. Above the fluting is the release leg that unlocks if from the cabinet and acts at the support feet when the bed is in the down position. Above the feet are rosettes that were cut in.

To tie it in to the customers existing furniture I matched the color and changed the crown up a little. The customer had some dental molding that they wanted to match. To get this to work I had to deviate from my standard cut list and make a taller header and sides. The dental molding wraps around and I needed to figure a break that would allow it to disassemble and reassemble to where the molding looked seamless.

The color is a dye stain followed by a wiping stain. The dye is a combination of brown and red dyes with a lot of thinner and the stain coat is Red Mahoney from Minwax. The cherry colors was matched off a customers drawer.

Here are some links to the building pictures

http://wwbeds.com/may08pictures/IM003587.JPG

http://wwbeds.com/april08pictures/IM003569.JPG

You can see more at our "Current Projects" page.